Testing The Catalyst; Read Testing - Raco Catalyst Owner's Manual

C. Testing the Catalyst

Read Testing

Read testing verifies the basic connectivity and functionality of the Catalyst.
1. Check that ComTest Pro , Alarmware, and the Catalyst are still setup as
described in the previous steps.
2. Click the Start button in Step 3 of the ComTest Pro screen. The program will
start repeatedly reading and displaying the selected registers' values. The Valid
Response(s) counter should start incrementing about once a second. This
indicates that the program can successfully read from the Catalyst.
Saved: 2015-08-03
Filename:
Catalyst EtherNet Option Setup R5 V01.docx
RACO Manufacturing and Engineering
Copyright © 1998-2015 RACO. All rights reserved.
Page 32 (37)