E. Channel Interlinking and Network Bridging
The Channel Settings also allows the status of an incoming SNA to be interlinked to a
SNA output channel. Once each scan cycle, the value of the input SNA is written to
the output SNA. Refer to the Advanced Channel Settings section of the Catalyst
manual for information for further information and configuration instructions.
This completes the Catalyst Setup. You may now perform the "Testing the
Catalyst Ethernet Functionality" procedure to verify its operation. This consists
of using a PC based program to simulate reading and writing the Catalyst SNA
addresses.
Saved: 2015-08-03
Filename:
Catalyst EtherNet Option Setup R5 V01.docx
RACO Manufacturing and Engineering
Copyright © 1998-2015 RACO. All rights reserved.
Page 22 (37)