Lippert Components Solera Classic Installation And Owner's Manual
  1. Manuals
  2. Brands
  3. Lippert Components Manuals
  4. Accessories
  5. Solera Classic
  6. Installation and owner's manual

Lippert Components Solera Classic Installation And Owner's Manual

Hide thumbs Also See for Solera Classic:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation & Owner's Manual, Installation Manual

Table of Contents

Introduction                                             2
Preparation                                             2
Resources Required                                       2
Installation                                              3
Installing the Awning Rail (if necessary)                        3
Assembling the Awning                                     4
Mounting the Bottom Mounting Brackets                       4
Mounting the Awning                                       5
Installing the Stop Bolt                                      7
Operation                                               7
Extending the Awning                                      7
Optional Car Port Position                                   7
Retracting the Awning                                      7
lippertcomponents.com
574-537-8900
Solera
Classic Awning
®
Installation and Owner's Manual
(For Aftermarket Application)
Solera
Awning
Installation and
Owner's Manual
(For Aftermarket Applications)
Fabric Replacement                                    8
Fabric Removal                                           8
Installing Replacement Fabric                                9
Classic Awning Troubleshooting              11
®
Fabric Care                                             12
1
Classic
®
®
Rev: 11.16 Solera
Classic Awning
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Solera Classic and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lippert Components Solera Classic

Summary of Contents for Lippert Components Solera Classic

  • Page 1: Table Of Contents

    Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) Solera Classic ® Awning Installation and Owner’s Manual (For Aftermarket Applications) Table of Contents Introduction                                             2 Fabric Replacement                                    8 Fabric Removal                                           8 Preparation                                             2...

  • Page 2: Introduction

    Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) Introduction Preparation The Solera Classic Manual Awning is designed for use on ® most recreational vehicle units and is available in a variety of sizes to fit even the largest unit. Additional information Moving parts can pinch, crush or cut.

  • Page 3: Installation

    Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) Installation NOTE: All screws supporting the awning assembly MUST have a backer within the structure of the wall of the unit. Refer to unit manufacturer for proper location. Installing the Awning Rail (if necessary) NOTE: Awning rail not included.

  • Page 4: Assembling The Awning

    Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) Assembling the Awning Mounting the Bottom Mounting Brackets NOTE: The head assemblies (Fig.3A) and support arm 1. On the awning rail, mark the position of the centerlines of the support arm assemblies. Ensure that the support assemblies (Fig.3B) are numbered to ensure proper arm assemblies will not interfere with any lights, vents or assembly.

  • Page 5: Mounting The Awning

    Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) Mounting the Awning 1. Measure the distance from the awning rail channel to the lower mounting bracket fastening point. 2. Compare the distance from the center of the roll tube and the support arm assembly foot to the measurement in Step 1 and adjust the support arm assembly to make both distances equal.
  • Page 6 Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) 11. Once the upper bracket is located, mark and pre-drill two 3/16" holes through the awning rail or unit. Apply a liberal amount of sealant over the holes and attach the Failure to maintain control of the roll tube, fabric upper mounting bracket using the ¼"...

  • Page 7: Installing The Stop Bolt

    Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) Operation Installing the Stop Bolt 1. Make sure the awning is retracted completely. Extending the Awning 2. Make sure the centerline of the roll tube is level with or 1.

  • Page 8: Fabric Replacement

    Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) 4. Loosen the black locking knob and unlock the mount/ 5. On the end of the awning rail the fabric will be removed rafter arm by releasing the spring clip from the top of from, remove the upper mounting bracket from the unit the head assembly.

  • Page 9: Installing Replacement Fabric

    Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) 13. Remove the three screws holding the drive head 6. Using the three screws previously removed from the end assembly end cap on the roll tube and set the drive caps, attach the drive head assembly to the roll tube, head assembly aside.
  • Page 10 Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) Operation section of manual) to ensure that the fabric is square on the roll tube. 15. Secure the fabric in the awning rail no more than 1" inside the edge of the fabric on both ends using a #6 x 1/2"...

  • Page 11: Solera ® Classic Awning Troubleshooting

    Solera Classic Awning ® Installation and Owner’s Manual (For Aftermarket Application) Solera Classic Awning Troubleshooting ® What's Happening? What Should Be Done? Check position of the cam lock (roll out). Ensure that the travel locks have been released from the outer arm. Awning will not extend.

  • Page 12: Maintenance - Solera ® Awnings

    Repeat if necessary. Allow to dry before retracting. Manual information may be distributed as a complete document only, unless Lippert Components provides explicit consent to distribute individual parts. All manual information is subject to change without notice.

Table of Contents