Download Print this page

Renesas RSKH836079 Quick Start Manual page 5

Starter kit

Advertisement

29. Select the correct device type (e.g. H8/36079F for RSKH836079).
30. Select "Erase Flash and Connect".
31. Select "Power target from Emulator" and select "5V" if the E8A is to provide the
power to the RSK board. Otherwise connect a 5V centre positive power supply.
32. Click <OK>.
33. The first time the E8A is used the 'E8AH8' dialog appears:
Otherwise skip to step 37.
34. Click <OK>.
35. Select "Renesas E-Series USB Driver". Select "USB interface". The channel number will not be needed.
36. Click <Close>.
37. Accept any dialog warning that a different version of E8A firmware is necessary to work with the application.
Allow download of firmware to complete, this may take several seconds.
38. Select the ID Code ("0E8A" for the RSKH836079) then click <OK>. The flash memory write program and E8A monitor are then
downloaded to the microcontroller
39. Right click on the download module listed in the left hand pane and select 'Download'.
The code will be downloaded to the microcontroller. This may take several seconds.
40. Click the <Reset – Go> button.
The code will run and you will see the LEDs flash on the board.
41. Click the <Stop> button.
The code will stop and the source code will be opened at the current program counter.
5. Next Step
After you have completed this quick start procedure, please review the tutorial code and sample code that came with the kit. You can add projects to the current
workspace by selecting (Project > Insert Project) from the main menu. The tutorials will help you understand the device and development process using Renesas
Development Tools.
The Hardware manual supplied with this RSK is current at the time of publication. Please check for any updates to the device manual from the Renesas internet site at:
www.renesas.com/renesas_starter_kits
6. Renesas H8 Compiler
The version of the compiler provided with this RSK is fully functional but time limited. You have 60 days to evaluate the full product before the compiler will limit the code
linker to 64k bytes. Full licensed H8 compiler versions are available from your Renesas supplier.

Advertisement

loading