Bike Mount - Blaupunkt BikePilot2 User Manual

USB port
Reset Button (inside)
Micro SD card slot
USB port: Port for charging up the battery via the power supply or for connecting the device to a PC via the
USB cable.
Slot for Micro SD cards: Here the device can have its memory expanded up to a maximum of 64 GB with
Micro SD cards from the SDHC category.
Both connections are located under a shared cover.
You can simply flip this up. Make sure that you close it again as soon as you start using the device outdoors.
This is the only way to guarantee IPX5-certified waterproofness.
Note: The rubberised cover also provides protection against the ingress of water. Make sure that it is always
completely closed when using the device.

1.2 Bike Mount

To fit the retaining bracket on the bicycle, you must feed the cable ties, which are also supplied, through the
slots provided for them in the retaining bracket, as shown in the drawing, and then pull them tight around the
handlebar or stem. Please also make sure that you wrap the elastic band around the handlebar or stem beneath
the retaining bracket beforehand. This will prevent any damage to your handlebar or stem. Please fit the
retaining bracket on the bicycle first before you secure the device to it. The cable ties can also be opened again
if you pull the small nipple on the closure upwards.
7