Blaupunkt BikePilot2 User Manual page 20

9.1.7 Start activity as track navigation
When you start an activity that has already been recorded or saved, you have the possibility of deciding whether
you want to start the activity as tracking or would like to convert it into a route in order to obtain turn-off
instructions.
9.1.8 Convert track to route
The Convert track to route function calculates a route which is as
similar as possible to the original track recording.
In addition, in contrast to standard track navigation you then get guidance
instructions by a beep noise. In addition, you are shown the arrival time
and the real distance.
Note: If road segments do not exist in the map material or sections of
road are avoided by the route options which are set, the alternative route
will make an appropriate detour.
The calculated alternative route is compared with the original track so
9.1.9 Start tracking directly
Start tracking directly starts the recording of the activity without any changes. You receive directional
instructions on the map view, but no beeps relating to turns or distances. Select Start tracking directly and tap
on .
You can now decide whether, taking account of your current position, you would like to be guided to the starting
point of the activity or to the nearest point on the route.
Note: This procedure is recommended, if you want to go after a track to 100%.
that you have the option to decide
for yourself which version of the
route you would like to use.
20