Table of Contents
Advertisement
12.4.10 Main menu functions
When you tap on Main menu functions, you see a list
containing all available functions.
Functions available on the main menu are activated.
Deactivated functions are not checked, slide to the end of the list and
can then be found in the Extras menu..
12.4.11 Default settings
If you tap on Default settings, you can reset the settings of the BikePilot² to the factory settings; the
navigation device is automatically restarted when you do this. You then have the option via the start
wizard of making new settings.
12.4.12 Time
The Time option allows you to set the time zone and the time
format.
Note: The current date and the current time are received with the GPS
signal and are thus always set to the nearest second.
To set the current time zone that you are in, tap the left or right arrow at
the top of the screen.
An automatic switchover between winter and summer time is preset. If
you prefer to set summer time manually, select On. When Off is
selected, winter time is displayed.
Confirm the settings with
changes by selecting the
12.4.13 Language
Tap on Language to select the menu language and a speaker.
First select the language in which you want to be guided through the BikePilot² menus. The language
is always specified in the respective national language.
If several speakers are preinstalled in a language on your device, select the speaker you want. Confirm your
selection with
12.4.14 Info about
You can use the Info about option to display system information, in particular about the version of the
navigation software used, about the map material and map data used. The
the software functions available to you for a limited period of time.
or exit the screen without saving your
button.
33
button gives you an overview of
Advertisement
Table of Contents
