Blaupunkt BikePilot2 User Manual page 28

Turns - Avoids or permits many turnoff manoeuvres (only in bicycle mode).
Ferries - Uses or avoids routes involving ferry connections.
Tunnels - Avoids or uses routing through tunnels.
Via ferrata - Avoids or uses routes along via ferrata (only in pedestrian mode)
Paths - Uses or avoids routes along paths and dirt tracks (only in bicycle mode). - Uses or avoids
routes along paths and dirt tracks (only in pedestrian mode).
To avoid one of the options, tap on the corresponding symbol. Crossed-through symbols mean that the
corresponding type of route will be avoided.
Note: Avoid does not mean that these types of routes are completely ruled out. It is always possible that
avoided types of routes will also be used in individual cases.
12.1.2 Stipulate country map
It is only ever possible to use one country map for one country. If you have installed several country
maps for a country on your device, you can stipulate the priority of the map to be used. This is then
used both for the map display and in the address entry.
To do this, proceed as follows:
Tap in the country selection list on the currently inactive map for a country.
The map priority prompt now appears.
12.1.3 Set speed profile
This function allows you to set your average speed. The set
profile helps to calculate the arrival time and overall journey
time more exactly.
You can make this setting separately for pedestrian and bicycle mode.
You can select in each case between slow, medium and fast. Set your
desired profile using the plus/minus buttons and confirm it with
12.1.4 Ask about route options
If this function is activated, the route options are asked about before each route calculation. This
function is activated as standard. If you do not frequently change the route options, disable this
function.
Note: This feature is standard ON.
.
28