Filtec FT-50 Operation Manuals page 11

No. Description
1 Center of Cap or Dud Button
2 Center of outer flat area.
3 Distance between 1 and 2.
4 Diameter of cap or lid.
5 Lip or Rim of Cap.
Document 40378-0502
4. Depending on the type of container you are inspecting,
proceed as follows:
• If you are inspecting bottles, proceed to
to determine the dud reference points for cap inspection.
When finished proceed to
• If you are inspecting cans, proceed to
determine the dud reference points for cap inspection.
When finished proceed to
5. Determine the Dud Reference Points by measuring (in milli-
meters) from the center of the dud button outward to the
middle of the flat portion of the cap.
5
Figure 6. Measure the dud reference points.
step 5 on page 9
step 9 on page 10.
step 5 on page 9
step 9 on page 10.
1 2
3
4
to
9