Table of Contents
Advertisement
Surface Cooking
IGNITION
SYSTEM
TO L]GHT SEALED
BURNER
ADDITIONAL
INFORMATION
Your range will feature pilotless igni-
f. Place utensi}on burner grate.
• When the range is first installed, the
tion; a spark from the ignitor lights the
pilots may be difficult to light due to air
burner.The ignitor is located at the back
2. Push in and turn knob to the LITE
in the gas line.To bleed offair from the
side of each surface burner,
position. After the burner lights, turn
line, hold a lighted match next to the
the knob to the desired flame size.
burner and turn knob on. When the
proceed as directed.
• Be sure all surface controls are set
in the OFF position prior to supplying
Ignitor
gas to the appliance.
o
REAR VIEW OF SEALED BURNER
• CAUTION: If flame should go out
_ ,,HO_ _
_
_
during a cooking operation, turn the
_
_
_
NOTE: The knob on your appliance
burner off. If gas has acoumulated
ii!_!
may not look like the knob in this il-
and a strong gas odor is detected,
5
.... 2 _t_;I _
_E
_
]ustration, but it will operate as de-
wait 5 minutes for the gas to dissi-
/t.
,_,_Jr_
scribed in this booklet,
pate before relightin9 burner.
3;_
• You may hear a "popping" sound o_
LP gas when the surface burner '
turned off. This is a normal operating
_ume_i__
_
_
sound of the burner.
._ _"_O _
_
• If a knob is turned very quickly from
_
_
_c
_
HIto LO setting, the flame may go out,
_:!
_._,
particularlyif the burner is cold.
"_
ABOUT THE SURFACE
DUAL PURPOSE HI SPEED
BURNER FLAME
SEALED
BURNERS*
(if equipped) = A properlyadjustedburner with clean
portswill lightwithin a few seconds.
Some modelsfeature oneor twospecial
HI SPEED sealed burners.
° On natural gas, the flame will be blue
with a deeper blue core; there should be
Refer to the rating plate to determine if
no trace of yellow in the flame.
your appliance features the HI SPEED
burners. See inside front cover for Ioca-
A yellow flame indicates an improper
lion of rating plate,
mixture of air/gas. This wastes fuel, so
have a serviceman adjust the mixture if
Ifthis occurs, turn the knob to the OFF
LOCATION
OF
BURNERS:
a yellow flame occurs,
position. Wait several seconds, then
• On LP gas, some yellow tipping is ac-
ceptable. This is normal and adjustment
is not necessary.
HIGH SPEED BURNER
]
(continued next page)
*U.S. Patent Pending
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 3468VRV and is the answer not in the manual?