Table of Contents
Advertisement
Surface C ooking
IGNITION
SYSTEM
TO LIGHT SEALED
BURNER
ADDITIONAL
INFORMATION
_ur range will feature pilotless igni-
1. Placeutensil on burner grate.
• Whenthe rangeis first installed,the
"_ion; a spark from the ignitor lights the
pilots may be difficultto lightdue to air
burner.The ignitoris locatedat the back 2. Push in and turn knob to the LITE
inthegasline.Tobleedoffairfromthe
side of each surface burner,
position. After the burner lights, turn
line, hold a lighted match next to the
the knob to the desired flame size.
burner and turn knob on. When the
_
burner lights, turn the knob off and
proceedas directed.
• Be sure all surface controls are set
in the OFF position prior to supplying
Ignitor
gas to the appliance.
REARVIEWOFSEALED BURNER
• CAUTION: If flame should go out
during a cooking operation, turn the
NOTE: The knob on your appliance
burner off. If gas has accumulated
may not look like the knob in this il-
and a strong gas odor is detected,
lustration, but it will operate as de-
wait 5 minutesfor the gas to dissi-
scribed in this booklet,
pate before relightingburner.
• Youmay heara "popping"soundon
LP gas when the surface burner is
turned off. This is a normal operating
sound of the burner.
• If a knob is turned very quicklyfrom
HIto LOsetting,the flame maygo out,
particularlyif the burner is cold.
ABOUT THE SURFACE
DUAL PURPOSE
HI SPEED
BURNER FLAME
SEALED BURNERS*
(if equipped) • A properly adjusted burner with clean
_,,_
_
-'_
_
_----_.-.-,_
Somemodelsfeatureone or two special
ports will light withina few seconds.
\\__l_,_.gL__
HI SPEED sealed burners.
• On natural gas, the flame will be blue
with a deeperblue core;there shouldbe
Refer to the rating plate to determine if
no trace of yellow in the flame.
,f"_/- _,_
_J I
your appliance features the HI SPEED
burners. See insidefront cover for Ioca- A yellow flame indicates an improper
tion of ratingplate,
mixture of air/gas. This wastes fuel, so
have a servicemanadjust the mixture if
Ifthis occurs,turnthe knobto the OFF
LOCATION
OF BURNERS:
a yellow flame occurs,
position. Wait several seconds, then
HIGI-SPEED B URNER
light the burner again.
• On LP gas, some yellow tipping is ac-
ceptable.This is normaland adjustment
is not necessary.
HIGH SPEED BURNER
(continuednext page)
*U.S. Patent Pending
5
Advertisement
Table of Contents
