RIOTEC DC9250 Programming Quick Manual

Programming Quick Guide
-DC9250: Docking Scanner
-DC9260: Wearable Scanner
Docking Scanner :
Gently touch the trigger area at the middle of scanner, to enable
the laser(for reading barcode)
Wearable Scanner :
Press the ring trigger to enable the laser.

Installation

They are Plug &Play USB (HID) devices. When plugged into your
Android OTG devices, it can be recognized as barcode scanner and
begin to scan the barcode. Before using scanner, make sure the
smartphone or tablet is fully charged.
Open your APP, they can work as a keyboard input.

Reset Configuration to Defaults

If you are unsure of the scanner configuration or have scanned the incorrect
codes, please scan the "Default" barcode. This will reset the scanner to its
factory defaults.
Default

Barcode Configuration Method:

(Flow chart for setup procedure :)
Abort
Configuration

Multi-Interface Functions

SOUND
LEVEL
LOUDER
LOWER
SOUND /
LONG LED CONTROL
SHORT
1
Multi-Interface Functions
DOUBLE CHECK
(ENABLE)
SINGLE SCAN

Keyboard Language

DENMARK
GERMANY
Start
Configuration
End
JAPAN
Configuration
NORWEGIAN
SPANISH
MIDDLE
SWITZERLAND
SILENT
MIDDLE
VIETNAM
DOUBLE
DOUBLE CHECK
CHECK
(DISABLE)
READING
SINGLE SCAN
MODE NO TRIGGER
FRENCH
HUNGARY
ITALIAN
PORTUGAL
SWEDISH
USA