RIOTEC DC9257L Programming Quick Manual

Programming Quick Guide
-DC9257L: Docking Scanner
-DC9267L: Wearable Scanner

Docking Scanner:

Gently tap the trigger area at the middle of scanner, to enable the
scanner(for reading barcode)

Wearable Scanner:

Press the ring trigger to enable the scanner.
Up Side
Trigger
Area
The touch sensor area is around middle of the scanner as drawing shown.
Installation
They are Plug &Play USB (HID) devices. When plugged into your Android
OTG devices, it can be recognized as barcode scanner and begin to scan
the barcode. Before using scanner, make sure the smartphone or tablet
is fully charged. Open your APP, they can work as a keyboard input.
Reset Configuration to Default
(scan from 1 to 3)
1 3
0006010
2
0001160

Barcode Configuration Method:

(Flow chart for setup procedure :)
Start
Configuration

Keyboard Country (For USB HID only)

0006010
Scan the appropriate country code as below to program the keyboard
layout for your country or language. As a general rule, the following
characters are supported, but need special care for countries other
Lower Side
than the United States: @ | $ # { } [ ] = / ' \ < > ~
USA
1103001
Denmark
1103003
France
1103005
Italy
1103007
0006000
Turkey F
1103006
Keyboard Country (For USB HID only)
Scan the appropriate country code as below to program the keyboard
layout for your country or language. As a general rule, the following
characters are supported, but need special care for countries other
than the United States: @ | $ # { } [ ] = / ' \ < > ~
End
Configuration
0006000
Japan
1103002
Finland
1103004
UK
1103227
Norway
1103008
Turkey Q
1103226
1
Belgium
1103202
Germany
Austria
1103209
Sweden
1103223
1D Symbologies – 1
UPC-E
ENABLE
UPC-A
ENABLE
0403020
Code 128
ENABLE
0404020
GS1-128
UCC/EAN-128
ENABLE
0400020
0412020
Spain
1103222
Russia
1103220
Portugal
1103218
DISABLE
DISABLE
0403010
DISABLE
0404010
DISABLE
0400010
0412010