Indoor Unit
(behind the grille)
Preliminary Site Survey
Be sure to read this manual before installing the air-conditioner indoor unit.
Voltage supply fl uctuation must not exceed + 10% of rated voltage. Electricity supply lines must be independent of
•
welding transformers which can cause high supply fl uctuation.
•
Ensure that the location is convenient for wiring, piping and drainage.
•
Do not exert pressure on the resin parts when opening the unit or when moving it after opening.
•
Do not move the unit from packaging while moving, until it reaches the installation site. Use safe material or protection
plates when unpacking it or lifting it to avoid damage or scratches to the unit.
Obstacle
1 IM-5CKE-0912(0)DAIKIN-EN.indd 5
1 IM-5CKE-0912(0)DAIKIN-EN.indd 5
INSTALLATION DIAGRAM
Drain Piping
Front Panel
Air Filter
Air Discharge Louver
Air Intake
Air Discharge
INSTALLATION OF THE INDOOR UNIT
0.5m or more
Floor
Thermal Insulation
Wrap the insulated pipe with the
fi nishing tape from bottom to top
Air Intake Grille
Air Intake
0.5m or more
1-5
Outdoor Unit
0.5m or more
9/28/12 2:04:15 PM
9/28/12 2:04:15 PM