Advertisement
Features and
TURNING HEADSET ON
Functions Guide
To turn your headset on, slide the Power
switch on (towards Power symbol on
headset). The indicator light is steadily
purple for several seconds, then flashes
blue (if paired and connected with another
device) or is steadily blue (if ready to be
paired).
To turn your headset off, slide the Power
switch off. The indicator light will turn off.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H680.
MAKING CALLS
European Union Directives Conformance
Statement
Function
Hereby, Motorola declares that
Receive a call
this product is in compliance with:
Mute or unmute a call
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
Reject a call
• All other relevant EU Directives.
End a call
Product
Approval
Redial last call
Number
The above gives an example of a typical Product
Approval Number.
You can view your product's Declaration of Conformity
Make a voice dial call
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product's label in
the "Search" bar on the web site.
Note: Your H680 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
EARBUDS AND YOUR
AND OFF
HEADSET
Your H680 headset is supplied with multiple
earbuds. The earbud is fitted onto the end of
your headset's earpiece speaker, and placed
onto your ear when using your headset.
Indicator
Light
Your headset's performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied earbuds with your headset.
Power
Switch
MAKING CALLS
CONTINUED
Action
Function
Action
Tap the Call button
Answer a second
Tap the Call button
incoming call
Tap both Volume
buttons
Disable the
First slide the switch
indicator light
toward charging plug
Press and hold a
(to turn headset off),
Volume button until
then press and hold
you hear two
both Volume
descending tones
buttons AND slide
Tap the Call button
the switch towards
the microphone (to
Press and hold the
turn headset on)
Call button until you
hear two ascending
Note: Some features are phone/network dependent.
tones
Tap the Call button
and speak the
name after the tone
CHANGING FOR USE
WEARING THE
ON OTHER EAR
HEADSET
You can wear your H680 headset on your left or
To wear your headset, flex the earhook and
right ear. The headset comes ready for the right
loop it over your ear as shown.
ear. To change the headset for the left ear:
1
Gently lift and pull the
top of the earhook up
and off speaker stem as
shown.
2
Flip the headset over.
3
Attach the earhook to
the speaker stem as
shown.
Be sure to position the ear bud into your ear
canal for optimal audio performance and
comfort.
INDICATOR LIGHTS
AUDIO TONES
With the Charger Plugged In
Headset Indicator
Headset Status
Audio Tone
Steady red
Charging
Ring tone
Off
Charging complete
Single high tone
With No Charger Plugged In
High to low tone
Headset Indicator
Headset Status
Single high tone when
Off
Power off
pressing volume button
Steady purple
Powering up
Two ascending tones
Steady blue
Pairing/connection
Two descending tones
mode
10 rapid purple flashes
Connection successful
Low to high tone
Slow blue flash
Standby (not on call)
Quick blue flash
Incoming call
No audio indications;
Slow blue pulse
Connected (on a call)
deteriorating quality
Slow purple pulse
Connected
Two tones
(on a muted call)
repeated every 30 sec.
Red flash
Idle (not connected)
Quick red flash
Low battery
Note: After 30 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
STORING YOUR
HEADSET
The charger case provided is used to charge
and store your headset. When not using your
headset, you should place it in the charger
base. Be sure to turn the headset off before
placing it into the charger case.
As shown, the charger cover can be placed on
top of the charger case, or underneath it to
provide support for desktop placement.
Headset Status
Incoming call
Phone network not
available
End call
Volume at minimum
or maximum
Mute enabled
Mute disabled
Connection
confirmation/voice
activation
Out of range
Low battery
Hide quick links:
Advertisement
