Motorola H690 Quick Start Manual

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Take a moment before you get started to familiarize yourself with your new H690
Bluetooth® Handsfree Headset. Along with your headset, a desktop charger is provided
for both charging and storage.
motorola
H690
Speaker
Quick Start Guide
Power
Switch
Call C
Indicator
Butto tto on
Light
Motorola, Inc.
3
P P PAIR
Consumer Advocacy Office
1307 East Algonquin Road
Your Headset
Schaumburg, IL 60196
Before you can use your headset, you must pair
www.hellomoto.com
(link) it with your phone.
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for Step A - ENSURE HEADSET IS IN PAIRING
hearing impaired)
MODE
Remove headset from charging base or
Guide Number: 6809521A35-A
desktop charger and power on by sliding
Power switch to the On position (towards
Power symbol on headset). The indicator light
first flashes during power up, then initiates
easy pairing. After a few moments, the
indicator light will be steadily lit in blue to
Bluetooth QD ID: Bxxxxxx indicate headset is in pairing mo pairing mode. pairing mode.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
If the headset does not enter pairing mode, does not enter pairing mo does not enter pairing mod
see TROUBLESHOOTING for help.
SHOOTING SHOOTING
© Motorola, Inc. 2008
PANTONE 8783 C
BEFORE YOU BEGIN
Volume
Buttons
Charging Charging
Contacts Contacts
(on reverse
side)
Charger C
Port
Microphone phone
ST ST START HERE > START
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
Menu >
1 On your Motorola phone, press ( )
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth Bluetooth devices Bluetooth devices it finds.
2 Select Select Select
Motorola Motorola H690 H690.
n blue to 3 Select Select OK OK K or Yes to pair your headset with r your head
y y our phone. our phone
4 Enter the passkey: Enter the passkey:
0000 0000 (for most phones) (for most phones)
Select elect .
5 OK OK.
Indicator Light ght
When your headset successfully pair hen your headset successfully pair essfully pairs and
(steadily blue lue
connects with your phon nnects with your phone, the indicator light
for pairing mode) or pairing mode)
changes from anges from steadily lit to flashing blue and nges from
purple.
Note: These steps are for most Motorola phones.
for for
For other phones, see your phone's user's guide. p y p g
CHARGE
1
Your Headset's Battery
Note: You can only charge the headset via the desktop charger.
You cannot plug a Motorola charger directly into the headset.
Remove plastic seal off of ear cushion on
1 When placing he placing headset on the desk placing headset on the desktop
speaker. charger, charger, t charg th h e indicator light turns red e indicator light turns red when
the battery is charging. It may take up to 1 the battery is charging. It may take u
Plug the Motorola charger into the port o o the port on the the port on the
2
minute for the indicator light to turn on.
desktop charger.
When the headset's battery is fully charged When the headset's battery is fully ch
3 Place head ace headset onto desktop charger as shown. ace headset onto desktop charger as shown.
Ensure that charging contacts on the headset Ensure that charging contacts on the headset h h (about 2.5 hours), the indicator light turns (about 2.5 hours), the indicator light tu
and desktop charge and desktop charger connect. p g green.
Note: Headset is not functional w unctional while charging.
Note: This pro te: This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
C harging hargi
of the rechargeable battery is approximately 400 charges.
C C ontacts ontact ontacts
3 3
2
Note: Earhook must be rotated to the orientation
show above to ensure charging contacts connect.
4
USING YOUR H690
TEST AND USE
See See See
Your phone and headset are now paired and
Features and Features and
ready to make and receive calls.
Functions Guide Functions Guide
on the reverse side e reverse side
To make a call:
for information on or information on
using your H690
1 Place the he ace the headset over your ear. See ace the headset over your ear. See
"Wearing the Headset" on the reverse side " "Wearing the Headset" on the reverse side
of this guide. of this guide.
On the phone, dial the number you want to On the phone, dial the number you want to
2 2
call and press call and press SEND SEND key on your phone. key on your phone.
If your phone and headset are successf If your phone and headset are successf e successfully
paired, you will hear ringing paired you will hear ringing ear ringing on the headset.
After yo After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
2
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
ght to turn For most Motorola phones (from home screen):
Menu > Settings > Connection >
1 Press ( )
Bluetooth Link > Setup.
2 Scroll to
Power.
3
Select
Change.
4 Scroll to
On.
5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
TROUBLESHOOTING
690 690
My headset will not charge.
Make sure your earhook and ear cushions are
properly orientated. See step 1 and "Ear
Cushions and Your Headset" to see proper
orientation.
My headset will not enter pairing mode.
Make sure thay any devices previously paired
H690
with the headset are turned off. If the indicator
light is not steadily lit in blue, turn off both the
other device and headset, wait 10 seconds, then
turn headset back on. Wait for the indicator light
to become steadily lit in blue, indicating the
headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2). If
the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and pair
your phone and headset again (see step 3).