Motorola H680 Quick Start Manual

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Take a moment before you get started to familiarize yourself with your new H680
Bluetooth Handsfree Headset. Along with your headset, a charger case is provided for
both charging and storage.
Speaker
motorola
H680
Power
Switch
Quick Start Guide
3
PAIR
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196 Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
www.hellomoto.com
For most Motorola phones:
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
1
On your Motorola phone, press
hearing impaired)
Settings > Connection > Bluetooth Link >
Guide Number: 6809510A87-O
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Bluetooth ID: B012842
2
Select Motorola H680.
3
Select OK or
your phone.
MOTOROLA and the Stylized M Logo are registered in the US
4
Patent & Trademark Office. The use of wireless devices and their
Enter the passkey:
accessories may be prohibited or restricted in certain areas.
5
Select OK.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
When your headset successfully pairs and
proprietor and used by Motorola, Inc. under license. All other
connects with your phone, the indicator light
product or service names are the property of their respective
changes from steadily lit to flashing blue.
owners.
Note: These steps are for most Motorola phones.
© Motorola, Inc. 2007.
For other phones, see your phone's user's guide.
BEFORE YOU BEGIN
Charger
Charging
Charging
Cover
Contacts Contacts
Volume
(on reverse
Buttons
side)
Charger
Port
Microphone
Indicator
Call
Light
Button
START HERE >
4
TEST AND USE
CONTINUED
Your Phone
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
1
Place the headset over your ear. See
Menu >
M ( )
"Wearing the Headset" on the reverse side
of this guide.
2 On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
Yes to pair your headset with
paired, you will hear ringing on the headset.
After you have successfully paired your
0000
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
1 2
START BLUETOOTH
CHARGE
Your Headset's Battery
Important: Your headset must be turned off
when charging. If you turned the headset on,
Your phone's Bluetooth feature is off by default.
see "Turning Headset On and Off" on reverse
To use your headset, you must turn on the
side for details on turning headset off.
Bluetooth feature in your phone.
1 Plug the Motorola charger into the port on the
charger case.
For most Motorola phones (at the main menu):
2 Place headset into charger case ensuring that 1
Press M (
charging contacts on the headset and charging
Bluetooth Link > Setup.
case connect.
2
Charging
Scroll to Power.
Contacts
3
Select
Change.
4
Scroll to On.
The indicator light turns red when the battery is
charging. It may take up to 1 minute for the
5
Press Select
indicator light to turn on. When the headset's
feature. The Bluetooth feature remains on
battery is fully charged (about 2.5 hours), the
until you turn the feature off.
indicator light turns off.
Disconnect the charger.
3 Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
Note: Headset is not functional while charging.
USING YOUR H680
See
My headset will not charge.
Features and
Make sure your headset is turned off when
Functions Guide charging. Your headset will not charge in the
on the reverse side
charger case while powered on.
for information on
using your H680 My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, turn off both the
other device and headset, wait 10 seconds, then
turn headset back on. Wait for the indicator light
to become steadily lit in blue, indicating the
headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
3
PAIR
FEATURE
Your Headset
Your Phone
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Remove headset from charging base and
Menu > Settings > Connection >
)
power on by sliding Power switch to the On
position (towards Power symbol on headset).
The indicator light flashes to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
to turn on the Bluetooth
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
TROUBLESHOOTING
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/Bluetoothsupport
Indicator Light
(steadily blue
for pairing mode)