Siemens 1FT7 Operating Instructions Manual page 52

Synchronous motors

Hide thumbs Also See for 1FT7:

Table of Contents

Servicing

9.2 Corrective maintenance

Motors with DRIVE-CLiQ

NOTICE

Motor data (electronic rating plate)

You must ensure that the new encoder contains the correct motor data. If it does not, the

motor may perform uncontrolled motions, leading to considerable material damage.

You can purchase a preprogrammed encoder module from the Siemens Service Center by

quoting the relevant order number and serial number. If your encoder module is not

preprogrammed, it must be programmed with the correct motor data prior to use.

1FT7 synchronous motors

Operating Instructions, 04/2010, 610.40075.40b

Table of Contents