Up to 18 kW total output: Minimum volume of the room where appliance is installed: ■ Ú 2 m³ per kW total output. Installation instructions Important notes A door leading to the open air or a window which can be ■...
Boring to fit the control knob (Fig. 2a + 2b) VA 420 000 Connection strip for combination with other Thickness of cabinet front: 16 - 26 mm Vario 400 appliances for flush installation As shown in the installation sketch, drill the Ø 35 mm hole to VA 420 001 Connection strip for combination with other secure the control knob in the cabinet front.
Electrical connection Check that the appliance has the same voltage and frequency as the electrical installation system. The hob is delivered with a mains cable and 3 pin moulded plug. Only connect the appliance to sockets which have been fitted and earthed according to regulations.
Need help?
Do you have a question about the VG 414 210 AU and is the answer not in the manual?
Questions and answers