Memory Module - HP Stream x360 Maintenance And Service Manual

Memory module

Description
Memory module, 4 GB (PC3L-1600) for use with Celeron N3050, Celeron N3060, and Pentium N3710 processors
Memory module, 8 GB (PC3L-1600) for use with Celeron N3050, Celeron N3060, and Pentium N3710 processors
Memory module, 4 GB (PC4-2400) for use in models with Celeron N4000 and Pentium N5000 processors
Memory module, 8 GB (PC4-2400) for use in models with Celeron N4000 and Pentium N5000 processors
Before removing the memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the memory module:
1. Remove the memory module shield.
The memory module shield is available using spare part number 910157-001.
2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
Bottom cover on page 28).
Battery on page 30).
Component replacement procedures
Spare part
number
691740-005
693374-005
862397-855
862398-855
33