HP Stream x360 Maintenance And Service Manual page 37

910166-001 – For use on computer models in aqua blue finish
910164-001 – For use on computer models in jet black finish
912836-001 – For use on computer models in snow white finish
910165-001 – For use on computer models in violet purple finish
L21649-001 – For use on computer models in infinity purple finish
4. Remove the three Phillips M2.5×4.3 screws (2) and the two Phillips M2.5×6.3 screws (3) that secure
the bottom cover to the computer.
5. Insert a case utility tool (1) or similar plastic, flat-edged tool between the bottom cover
and the computer near the display hinge area.
6. Release the bottom cover (2) by swinging the rear edge up and forward until it releases.
7. Remove the bottom cover (3).
Reverse this procedure to install the bottom cover.
Component replacement procedures 29