Battery - HP Stream x360 Maintenance And Service Manual

Battery

Description
Battery (3-cell, 40-WHr, 3.615-AHr, Li-ion; includes cable)
Before removing the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Remove the five Phillips PM2.0×3.3 screws (2) that secure the battery to the keyboard/top cover.
3. Remove the battery (3).
Reverse this procedure to install the battery.
30 Chapter 5 Removal and replacement procedures
Bottom cover on page 28).
Spare part number
844201-856