AT&T CL84107 Quick Start Manual page 2

Reset language to English Caller ID announce
If you have accidentally changed the screen display language When this feature is on and you have an incoming call, the
and want to switch back to English, follow the step below.
handset and/or base speaks "Call from..." and the name of
the caller based on the directory or caller ID information.
Using a cordless handset or the telephone base:
You can turn this feature off for the base or each individual
Ì
in idle mode -> enter 364#. handset, or both.
Using a cordless handset or the telephone base:
1. -> or
Operate
2. or -> Caller ID annc -> SELECT.
to choose Set all On/Off, Local handset or
3. or
Base -> SELECT.
Operation Steps
4. or to choose On or Off -> SELECT.
Making a call Using a cordless handset:
Ì
Press PHONE or /SPEAKER ->
Enter the telephone number. Review and dial a number in the call log
Using the telephone base:
Using a cordless handset or the telephone base:
Ì /SPEAKER or lift the
Press
1. in idle mode ->
corded handset -> Enter the
2. When the desired entry is displayed, press
telephone number.
/SPEAKER on the cordless handset to call. On the
On-hook dialing Enter the telephone number -> Press telephone base, lift the corded handset or press
(predialing) PHONE, /SPEAKER or lift the /SPEAKER to call.
corded handset on the telephone base
to call.
Missed call indicator
Using a cordless handset:
Answering a call
When a handset or the telephone base is in idle mode and
Ì
Press PHONE or /SPEAKER, or
has new or missed calls, its screen shows XX Missed calls.
press any dialing key (0-9,
You can erase the missed call indicator either by reviewing
TONE or #).
the call log one by one, or by pressing and holding CANCEL
Using the telephone base: on the handset or CANCEL on the telephone base in idle
mode.
Ì
Press /SPEAKER, or lift the
corded handset.
Ending a call Using a cordless handset:
Directory
Press OFF or return the handset to
the charger.
The directory can store up to 50 entries, which are shared by
Using the telephone base:
all system devices.
Ì Press /SPEAKER, or hang up the
Operation
corded handset.
Adding an
1.
Handset During a call, press /SPEAKER
entry
speakerphone SELECT.
to switch between handsfree
speakerphone and normal handset
2.
use.
3. Enter a telephone number up to 30
digits -> SELECT.
Redial Using a cordless handset:
4. Enter a name up to 15 characters ->
Ì
Press REDIAL repeatedly to select
SELECT.
the desired entry -> PHONE or
/SPEAKER to call. Searching/ 1.
dialing an
2. Press
Using the telephone base:
entry
directory, or press the dialing keys
Ì
Press REDIAL repeatedly to
(0-9) to start a name search.
select the desired entry -> press
3. Press
/SPEAKER, or lift the corded
handset to call.
handset to call
-OR-
On the telephone base, press
Volume control On the telephone base, press
VOL to decrease or press VOL to
handset to call.
increase the listening volume during a
call. On a cordless handset, press
or .
Smart call blocker*
Call waiting
FLASH on the handset or
Press
(Requires
FLASH/PTT on the telephone base to
subscription
put current call on hold and to take
If you have subscribed to caller ID service, then you can use
from telephone
the new call; press again to switch
the Smart call blocker feature to filter incoming calls from
service provider)
back and forth between calls. unknown callers.
Turn Smart call blocker on or off
Caller ID
Smart call blocker is set to on, and to screen all unknown
calls by default. To turn on or off Smart call blocker:
Using a cordless handset or the telephone base:
This product supports caller ID services offered by most
telephone service providers. The telephone stores caller ID Ì
CALL BLOCK in idle mode -> SELECT ->
information of the last 50 incoming calls in the telephone
On or Off -> SELECT.
base. This information is common to all devices.
* Includes licenced Qaltel TM
Qaltel is a trademark of Truecall Group Limited.
TM
Notes:
Ì
Smart call blocker is on and in default screening mode, once you install
your telephone. It will screen all incoming calls and asks callers to
announce their names. We recommend that you set up your directory,
allow list, and star name list before using your telephone with Smart
call blocker. This can avoid calls from your business associates, family
members and friends to go through the screening process.
Ì
If you turn off Smart call blocker, all incoming calls will ring, including
-> Settings -> SELECT.
numbers saved in your block list.
Ì
When QUIET mode is on, and Smart call blocker is on and in screening
mode, all screened calls will be sent to the answering system after
screening.
Call controls
Call categories Call control and
Ì
Unwelcome Numbers The telephone blocks
calls saved in block these calls from
or to scroll through the list.
list. ringing through.
or
Ì
Welcome calls Numbers The telephone allows
saved in allow these calls to get
list. through and ring.
Ì
Numbers
saved in
directory.
Ì
Numbers do
not found in
block list.
Ì
Caller ID
names saved
in star name
list.
Ì
Calls without Numbers that You can choose one
numbers are "out of of the following five
area" or set to options:
"Private".
Screening with caller
name (default setting)
The telephone
Steps
plays the screening
announcement, and
-> or -> Directory ->
then ask the caller
to say his/her name
-> Add contact -> SELECT.
or before the call rings
on your telephone.
You can then answer
the call, and hear
the caller's name
announced. You can
decide whether to
in idle mode.
accept or reject the
or to browse through the
call, or to forward the
call to the answering
system.
or /SPEAKER on a
Ì
Uncategorized With absent
Screening without
calls caller ID
caller name
number.
The telephone
Ì
Numbers do
/SPEAKER or lift the corded
plays the screening
not found in
announcement, and
directory.
then ask the caller
Ì to press the pound
Numbers do
not found in key (#) before the
call rings on your
allow list.
telephone. You can
Ì
Numbers do
then answer the call.
not found in
block list.
Allow
Ì The telephone allows
With caller ID
names that do the calls to get
through and ring.
not found in
star name list
Answering system
The telephone
forwards the calls to
the answering system
without ringing.
or ->
Block
The telephone rejects
the calls with block
technology.
announcement.
Basic setups
Set up block list, allow list, and star name list
Call block Steps
basic setups
Adding an entry in
1. CALL BLOCK -> or -> Block
block list
list -> SELECT.
2. or -> Add new entry ->
SELECT.
3. Enter a telephone number up to
30 digits -> SELECT.
4. Enter a name up to 15 characters ->
SELECT.
Adding an entry in
1. CALL BLOCK -> or -> Allow
allow list
list -> SELECT.
options
2. or -> Add new entry ->
SELECT.
3. Enter a telephone number up to
30 digits -> SELECT.
4. Enter a name up to 15 characters ->
SELECT.
Adding an entry in
1. CALL BLOCK -> or -> Star
star name list
name list -> SELECT.
2. or -> Add new entry ->
SELECT.
3. Enter a name up to 15 characters ->
SELECT.
Notes
Ì
The allow list stores up to 200 entries, the block list stores up to 1,000
entries, and the star name list stores up to 10 names.
Ì There are many organizations like schools, medical offices, and
pharmacies that use robocalls to communicate important information
to you. Robocall uses an autodialer to deliver pre-recorded messages.
By entering the name of the organizations into the star name list, it
ensures these calls will ring through when you only know the caller
names but not their numbers.
Call block settings
Set call block Steps
Allow all calls to CALL BLOCK in idle mode -> SELECT
ring, including -> or -> Off -> SELECT.
numbers on the
block list
Screen all
1. CALL BLOCK -> -> Calls
or
unknown calls
w/o num -> SELECT.
(default settings)
2. or -> Screening -> SELECT.
-> w/ Caller name ->
3. or
SELECT.
4. or -> Uncategorized ->
SELECT.
5. or -> Screening -> SELECT
6. or -> w/ Caller name ->
SELECT.
Block all unknown
1. CALL BLOCK -> or -> Calls
calls
w/o num -> SELECT.
2. or -> Block -> SELECT.
3. or -> Uncategorized ->
SELECT.
4. or -> Block -> SELECT.
Block calls on the
1. CALL BLOCK -> or -> Calls
block list only
w/o num -> SELECT.
2. or -> Allow -> SELECT.
3. or -> Uncategorized ->
SELECT.
4. or -> Allow -> SELECT.
Message playback
Set call block Steps
Using the telephone base:
Forward all
1. CALL BLOCK -> or -> Calls
unknown calls to Ì
w/o num -> SELECT. Press /PLAY when the telephone base is in idle mode. If
the answering
there are only new or only old messages, they are played
2. or -> Answering sys ->
system
automatically. If there are both old and new messages,
SELECT.
press or -> Play new msgs or Play old msgs ->
3. or -> Uncategorized ->
SELECT.
SELECT.
4. or -> Answering sys ->
Using a cordless handset:
SELECT.
Ì
Press twice when the handset is in idle mode. If
Block calls without
1. CALL BLOCK -> -> Calls
or
there are only new or only old messages, they are played
numbers and send
w/o num -> SELECT.
automatically. If there are both old and new messages,
uncategorized
2. or -> Block -> SELECT.
press or -> Play new msgs or Play old msgs ->
calls to the
SELECT.
answering system 3. or -> Uncategorized ->
SELECT.
Options during playback
4. or -> Answering sys ->
SELECT.
Feature On the telephone
Adjust Press
playback
Answering system VOL /
to volume
Stop Press
About answering system and voicemail
playback
Your telephone has separate indicators for two different Skip to
Press
types of voice messages: those left on the built-in answering the next
system and those left at your telephone service provider's message
voicemail. To listen to messages recorded on the built-in
Repeat the
Press
answering system, refer to the Message playback section;
message
to listen to voicemail, contact your telephone service
provider for more information. Play the Press
previous
twice
message
Turn answering system on or off
Delete the Press MUTE/DELETE
message
The answering system must be turned on to answer and
record messages.
Using a cordless handset:
-> Answering sys -> SELECT.
1. -> or
For more detailed instructions, please refer to the Abridged
2. or -> Answer ON/OFF -> SELECT. user's manual provided in your package, or for a full set of
installation and operation instructions, refer to the online
3. or to choose On or Off-> SELECT.
CL84107/CL84207/CL84257/CL84307/CL824357
When the answering system is on, the handset shows
DECT 6.0 corded/cordless telephone/
ANS ON.
answering system with caller ID/call waiting
Using the telephone base:
Complete user's manual at
Ì
Press / ANS ON/OFF to turn the answering system on www.telephones.att.com/manuals
or off. If the answering system is turned on, it announces,
"Calls will be answered." If the answering system is turned For customer service or product information, visit our
off, it announces, "Calls will not be answered."
www.telephones.att.com
website at
1 (800) 222-3111
. In Canada, dial
Message alert tone
When this feature is on, and there is at least one new
message, the telephone base beeps every 10 seconds.
Using a cordless handset or the telephone base:
1. -> or -> Answering sys -> SELECT.
-> Ans sys setup -> SELECT.
2. or
3. or -> Msg alert tone -> SELECT.
4. or to choose On or Off -> SELECT.
Call screening
Use this feature to choose whether incoming messages
can be heard over at telephone base when they are
being recorded. If you turn call screening on, you hear
the incoming message. While monitoring an incoming
message, you can answer the call by pressing PHONE on
the handset, or pressing /SPEAKER or lifting the corded
handset on the telephone base.
Using a cordless handset or the telephone base:
1. -> or -> Answering sys -> SELECT.
2. or -> Ans sys setup -> SELECT.
3. to select Call screening.
4. or to choose On or Off -> SELECT.
On a handset
base
Press
/VOLUME/
VOL
/STOP Press 5
Press 6
/SKIP
Press 4
/REPEAT
/REPEAT Press 4 twice
Press MUTE/DELETE
.
or call
1 (866) 288-4268
.