Advertisement
Operating Instruction
ON/OFF
With the light switched off, press and hold the top switch for 0.5 seconds to turn on the light on the
last used output.
With the light turned on, press and hold the top switch for 0.5 seconds to turn off the light.
Output Selection
With the light switched on white light mode, single click the top switch to cycle through
Low→Med→High→Turbo.
With the light switched on red light mode, single click the top switch to cycle through Red→Signal
Light→SOS.
Mode Switching
In white light mode, press and hold the top switch for 1.2 seconds to enter red light mode.
In red light mode, press and hold the top switch for 1.2 seconds to enter white light mode.
Battery level Indication
With the light switched off, single click the top switch. The battery level indicator will display the
battery status for 3 seconds.
Green constant on: saturated, 100% - 85%
Green flashes: sufficient, 85% - 50%
Red constant on: poor, 50% - 25%
Red flashes: critical, 25% - 1%
Note: There is no indication when CR123A battery is used.
Charging
1. Turn off the light. Plug the USB side of the charging cable into any USB power supply. Uncover the
anti-dust cap of the light, and plug the Micro USB side of the charging cable into the charging port of
the light.
2. The battery level indicator displays red while charging and turns to solid green when charging is
complete. The normal charging time of the included Fenix ARB-L17-700 is about 1.5 hours.
3. Once charging is completed, be sure to remove the charging cable and replace the anti-dust cap to
protect against dust and foreign objects.
4. Recharge a stored light every four months to maintain optimum performance of the battery.
5. Only Low output can be used when the light is being charged, but charging time will be prolonged.
Battery Specifications
Type
Fenix ARB-L16-700
Non-rechargeable
Battery (Lithium)
Rechargeable Battery
(Li-ion)
Warning: For emergency situation, non-rechargeable CR123A battery can be used, but charging is
prohibited. Rechargeable Li-ion battery with no protection board is forbidden.
**16340 rechargeable Li-ion batteries are powerful cells designed for commercial applications and
must be treated with caution and handled with care. Quality batteries with circuit protection will
reduce the potential for combustion or explosion but cell damage or short circuiting are potential risks
the user assumes.
Battery Replacement
Unscrew the tail cap to insert the battery with the anode side (+) towards the light head, then screw
Dimensio
Nominal
n
Voltage
16340
3.7V
CR123A
3V
16340
3.6V/3.7V
Usability
Recommended
√√
Usable
√
Cautious**
！
Advertisement
