Dip Switch Settings - Datecs DPP-350 User Manual

Dip Switch Settings

The DPP-350
communications. Care must be taken to ensure that the DIP
Switches are not changed from its default factory configuration
unless required.
 DIP SWITCH SETTINGS:
The printer has two absolutely different operation modes.
They are determined by the state of switch Sw2:
OFF ESC/POS mode

ON

Switch
Sw1
Sw2
Sw3
Sw4 Normal operation mode
DPP-350 User Manual
is designed
Hex Dump mode
OFF
Wide paper roll
(78 mm)
ESC/POS mode
Hardware protocol
to use
Table 6
. . . . . . . . . . . . . . . . . . . . . .
different methods
ON
Thinner paper roll
(58 mm)
Hex Dump mode
Xon/Xoff protocol
Protocol mode
Page 15
of