Lubrication; Greasing And Lubricating The Machine - Toro DH 210 Operator's Manual

Lubrication

Greasing and Lubricating
the Machine
Service Interval: Every 25 hours/Yearly (whichever
comes first)—Grease and lubricate
the machine. (Grease and lubricate
it more frequently when operating it
in dusty or sandy conditions.)
How to Grease the Machine
Note:
Grease the machine with a general-purpose
grease.
1. Disengage the blades (PTO).
2. Set the parking brake.
3. Stop the engine and wait for all moving parts to
stop.
4. Remove the ignition key.
5. Clean the grease fittings with a rag, and scrape
any paint off the front of the fittings.
Grease Locations
Item Name
Front wheel—grease fittings
1
2 Steering ball joints
3 Steering sector gear
4 Steering pinion gear
5 Steering shaft bearing
6 Steering shaft bearing
7 Motion lever
8 Shaft hub for lifting the mower housing
9 Motion link ball joints
10 Traction idler pulley belt—grease fitting
11 Brake pedal shaft pivot points
12 Parking brake ring
13 Steering bearing
14 Left and Right Spindle—grease fittings
15 Mower housing hinged pins
16 Front axle pivot pins
6. Connect a grease gun to each fitting and pump
grease into it.
7. Wipe up any excess grease.
Where to Add Grease
Quantity Interval (hours)
(pumps)
2 25
4 50
1 50
1 25
1 50
1 50
1 50
1 50
4 50
1 50
2 50
1 50
1 25
2 25
6 When removed
2 When removed
22
Figure 21
Lubricant
Grease
Oil
Grease
Grease
Oil
Oil
Grease
Oil
Oil
Grease
Oil
Oil
Grease
Grease
Grease
Grease
g008270