D-Link DCS-4633EV User Manual page 42

Section 3: Configuration
Night Mode: Here, you can enable a different set of image settings for when the camera
uses night mode. To do so, enable Night Mode, select the period of time
you want the different image settings to apply, then adjust the image
settings as desired. After making any changes, click the Save button to
save your changes.
Note: This does not control when night mode will be used; this only
controls when these image settings will be used.
This profile If Night Mode is enabled, you can set a schedule via the drop-down boxes
is applied to to set the time span for the settings to take effect.
Night Mode
from:
Exposure Changes the exposure mode. Use the drop-down box to set the camera for
Indoor, Outdoor, or Night environments, or to Moving to capture moving
Mode:
objects. The Low Noise option will focus on creating a high-quality picture
without noise. You can also create 3 different custom exposure modes. Max
Gain will limit the brightness of the exposure.
Denoise: This setting controls the amount of noise reduction that will be applied to
the picture.
3D Denoise: This setting controls the amount of 3D denoise that will be applied to the
picture. 3D denoise reduces the amount of image noise when viewing a low-
light environment.
Brightness: Adjust this setting to compensate for backlit subjects.
Contrast: Adjust this setting to alter the color intensity/strength.
Saturation: This setting controls the amount of coloration, from grayscale to fully
saturated.
Sharpness: Specify a value from 0 to 100 to specify how much sharpening to apply to
the image.
D-Link DCS-4633EV User Manual 42