Removing And Replacing The Oven Door - Samsung NE59K6851 Series User Manual

Maintaining your appliance

Removing and replacing the oven door

How to remove the door
You can remove the upper door the same way you remove the full door.
CAUTION
• The door is very heavy. Be careful when removing and lifting the door. Do not
lift the door by the handle.
• Turn the power OFF before removing the door.
1. Open the door completely.
2. Pull the hinge locks down toward the door frame to the unlocked position.
3. Firmly grasp both sides of the door at the top.
about 5°
Fig. 1
Close the door to the door removal position, which is approximately 5 degrees
4.
from vertical (Fig. 1).
5. Lift door up and out until the hinge arm is clear of the slot (Fig. 2).
42 English
NE59K6851SS_AC_DG68-00872A-00_EN+MES+CFR.indb 42
Hinge lock
Locked position Unlocked position
Fig. 2
How to replace the door
You can replace the upper door the same way you replace the full door.
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
Hinge
arm
Bottom
edge of
slot
Indentation
3. Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity into the
locked position.
Unlocked position
5. Close the oven door.
Hinge lock
Locked position
12/16/2016 9:37:34 PM