Table of Contents
Advertisement
Cleaning the spray arms
The spray arms should be cleaned regularly, to prevent hard water
deposits from clogging the spray arm jets and bearings.
o To remove the spray arm, unscrew the nut and take out the
o Gently pull upwards to remove the spray arm.
o Wash the spray arm in warm, soapy water and use a soft brush
o Rinse the spray arm thoroughly and then reassemble the spray
Cleaning the control panel
IMPORTANT: Do not use any abrasive cleaner or household polish on
either the control panel or operating parts.
Cleaning the door
o To clean the edge around the outside of the door, you should use
o To prevent water from penetrating the door lock or electrical
o DO NOT use any abrasive cleaner or scouring pads on the inner
Downloaded from
www.Manualslib.com
washer that sits on top of the spray arm.
to clean the jets.
arm back in its original position.
Wipe over the control panel using a brand new damp cloth
with warm water.
a soft, damp cloth only.
components, DO NOT use a spray cleaner of any kind.
or outer surfaces, as they may cause damage to the surfaces.
manuals search engine
26
Advertisement
Table of Contents
