Punch Option Setting - Olivetti FS-519 Service Manual

8. Finisher operations
8.2

Punch option setting

• To set installation and model of the punch kit.
Functions
• To set the number of holes to be made by the punch kit installed.
Use • Use when the punch kit is installed.
• The default setting is Non-installat.
1. Touch [PK-510] if installed on MF450 and [PK-515] if installed on MF350 Family.
Setting/
2. Select the number of punch holes to be made corresponding to the model and destina-
Procedure
tion.
3. Touch [decision].
4. Turn off the main power switch and turn it on again more than 10 seconds after.
76
Field Service Ver. 3.0 Jan. 2008
Service Manual Y108442-7