Sensor Check For D-Color Mf450; Check Procedure - Olivetti FS-519 Service Manual

7. Sensor Check
7.

Sensor Check for d-Color MF450

7.1

Check procedure

• To allow sensors to be checked for operation easily and safely, data applied to the IC on
the board can be checked on the panel with the main body in the standby state (including
a misfeed, malfunction, and closure failure condition).
A. Procedure
1. Call the Service Mode to the screen.
See P.434 of the main body service manual.
2. Touch [State Confirmation].
3. Touch [Sensor Check].
4. Touch eight times [ ].
B. Sensor check screen
• This is only typical screen which may be different from what are shown on each individ-
ual main body.
70
Field Service Ver. 3.0 Jan. 2008
Service Manual
A01GF3E505DA
Y108442-7