Field Service Ver. 3.0 Jan. 2008
[2]
[1]
[1]
[3]
4.4.21
Elevator motor/Timing belt
A. Removal procedure
1. Remove the tray unit.
See P.31
2. Remove the tray unit front cover.
See P.29
3. Remove the tray unit rear cover.
See P.29
[1]
[3]
[2]
Y108442-7
16. Remove the C-ring [1] and remove
9J08F2C540DA
17. Remove two screws [1] and two
[2]
9J08F2C015DA
4. Remove the screw [1] and remove
5. Remove the wire saddle [2] and dis-
A01GF2C533DA
Service Manual
the gear [2].
shoulder screws [2], and remove the
aligning plate assy [3].
the ground wire.
connect the connector [3].
4. Other
57