Bang & Olufsen BeoSound Shape Installation Manual page 10

Hide thumbs Also See for BeoSound Shape:
Table of Contents

Advertisement

When mounting section 1. Mount one screw and a washer in the top of one of the Star Rails. Use a spirit level to level out the Star Rails, use the
towers for levelling. Mount one Screw and washer in the top of each Star Rail. Mount section 2, 3, 4 etc. Mounting one screw in the top of each
Star Rail. Use a spirit level before mounting the screws. When all Star Rails are mounted with one screw. Mount at least two more screws and
washers in the Star Rail.
Mount at least three screws at each Star Rail in the setup. Use the spirit level at every Star Rail before mounting the screws.
Note, screws for mounting on the wall is not included.
Recommended placement of screws
Towers for
levelling
Alternative placement of screws
Incorrect placement of screws:
Mounting
8 mm
8 mm
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents