Appendix E: Ce Certificate; Declaration Of Conformity - Gamry Interface 5000 Operator's Manual

Appendix E: CE Certificate

Declaration of Conformity

According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Manufacturer's Name and Location:
This declaration is for the Gamry Instruments product: Interface 5000 Potentiostat/Galvanostat/ZRA.
The declaration is based upon compliance with the following directives:
EMC Directive 2004/108/EC
Low Voltage Safety Directive 2006/95/EC
The declaration is based upon product compliance with the following standards as defined in report
number R0692-001 from Ergonomics, Inc. for safety analysis and report number R-2150P from Retlif
Testing Laboratories, Inc. for EMC test and analysis.
EMC Standards
EN 61326-1:2013 Table 1
EN 61326-1:2013 Clause 7.2
Low Voltage Directive
Safety Standards
EN 61010-20
__
Signature
Dr. Gregory A. Martinchek, PhD
Title: President
Appendix E: CE Certificate--Declaration of Conformity
Redefining Electrochemical Measurement
EMC – Electrostatic discharge, Immunity
EMC – Emissions
Safety requirements for electrical equipment for measurement, control and laboratory
use, Part 1: General requirements.
__
Formal signed declaration is on file at Gamry, Inc.
Title
Title
September 23, 2014
Date
73
Class/ Criteria
B
A