Temperature Measurement - Gamry Interface 5000 Operator's Manual

Galvanostatic Mode
Maximum Full Scale Current
Minimum Full Scale Current
Accuracy
Sig Gen Voltage for Full Scale Current

Temperature Measurement

Measurement range
Accuracy of measurement
RTD resistance at 0°C
RTD's temperature coefficient of
resistance, 0 to 100°C range
Temperature-reading display
RTD connection
RTD calibration
Environmental
Operating Temperature Range
Relative Humidity
Storage and Shipping Temperature
Maximum Shipping Acceleration
General
DC Power Input Voltage
Power
Leakage Current (floating, earthed
working electrode)
Dimensions
Weight
Dimensions of External Power Adapter
Weight of External Power Adapter
NOTES:
1. Measured in galvanostatic mode with a high-power 2.4  load resistor connected from the counter to the
working electrode leads. The compliance voltage is measured using an external voltmeter across the 2.4 
load. Under these conditions, the output current is approximately 2.72 A.
Appendix A: Interface 5000 Specifications
±5
±50
Dominated by current-to-voltage
converter accuracy shown above
±3.0 V
–50 to 600
Typ RTD error ± 0.3
Typ 1000
Typ 0.00385
°C rounded to one decimal point
Customer-provided
Customer-provided, if required
0 to +45
Max 90 (non-condensing)
–25 to +75
30
Range 46 to 50
Max 85
Typ ±10
24 × 27 × 6
Max 2.5
Max 14.7 × 6.7 × 3.4
Max 450
61
A
µA
°C
°C Note 24
Ω
Ω/°C Note 25
°C
Note 26
°C
%
°C
g
V
W
nA Note 27
cm Note 22
kg Note 22
cm Note 23
g Note 23