Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Makita HS7000
Summary of Contents for Makita HS7000
-
Page 1: Circular Saw
INSTRUCTION MANUAL Circular Saw HS7000 HS7600 DOUBLE INSULATION Read before use. -
Page 2: Specifications
Makita genuine saw blades, other materials refrigerators. There is an increased risk of elec- can also be sawed. tric shock if your body is earthed or grounded. - Page 3 Use of power supply via an RCD with a rated residual current of 30 mA or less is always recommended. Power tools can produce electromagnetic fields (EMF) that are not harmful to the user. However, users of pacemakers and other similar medical devices should contact the maker of their device and/or doctor for advice before operating this power tool.
-
Page 4: Circular Saw Safety Warnings
Service Kickback causes and related warnings Have your power tool serviced by a qualified — kickback is a sudden reaction to a pinched, jammed or misaligned saw blade, causing an repair person using only identical replacement parts. This will ensure that the safety of the power uncontrolled saw to lift up and out of the workpiece tool is maintained. - Page 5 Check the operation of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a build-up of debris. The lower guard may be retracted manually only for special cuts such as “plunge cuts”...
-
Page 6: Functional Description
FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting depth of cut CAUTION: • After adjusting the depth of cut, always tighten Some material contains chemicals which may be toxic. Take caution to prevent dust inhala- the lever securely. tion and skin contact. Follow material supplier safety data. - Page 7 For HS7600 ► 1 . Clamping screw ► 1 . Cutting line (0° position) 2. Cutting line (45° For HS7000 position) Loosen the front and rear clamping screws. Set for the For straight cuts, align the 0° position on the front of the desired angle (0°-45°) by tilting accordingly, then tighten...
- Page 8 NEVER use the tool if it runs when you simply pull the switch trigger without pressing the lock-off button. Return tool to a Makita service center for proper repairs BEFORE further usage. • NEVER tape down or defeat purpose and func- tion of lock-off button.
- Page 9 ► 1 . Vacuum cleaner 2. Hose When you wish to perform clean cutting operation, connect a Makita vacuum cleaner to your tool. Install the dust nozzle on the tool using the screw. Then connect a hose of the vacuum cleaner to the dust noz- zle as shown in the figure.
-
Page 10: Operation
For tool without dust nozzle provided as a standard Rip fence (Guide rule) (optional equipment, replace the lever fixed on the lower guard to accessory) the one supplied with the dust nozzle (optional acces- sory) at the same time when installing the dust nozzle. Otherwise you will not be able to make a cut because the lower guard movement is hindered by the dust nozzle. -
Page 11: Replacing Carbon Brushes
Only use accessory or attachment for Replacing carbon brushes its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. • Saw blades • Rip fence (Guide rule) •... - Page 12 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885371A939 20170715 www.makita.com...