Table of Contents
Advertisement
I/O Connectors
SATA (Serial ATA) Connectors
Features
•
2 Serial ATA 3.0 ports with data transfer rate up to 6Gb/s (SATA 0 and SATA 1)
•
Integrated Advanced Host Controller Interface (AHCI) controller
The Serial ATA connectors are used to connect Serial ATA devices. Connect one end of the Serial
ATA data cable to a SATA connector and the other end to your Serial ATA device.
BIOS Setting
Configure the Serial ATA drives in the Advanced menu ("SATA Configuration" submenu) of the
BIOS. Refer to the chapter 3 for more information.
Chapter 2 Hardware Installation
Chapter 2
SATA 3.0 6Gb/s
SATA 0
1
GND
TXP
TXN
GND
SATA 1
RXN
RXP
7
GND
20
SATA (Serial ATA) Power Connectors
The SATA power connectors supply power to the SATA drive. Connect one end of the provided
power cable to the SATA power connector and the other end to your storage device.
SATA
4
+5V
Power 0
Ground
Ground
+12V
1
SATA
Power 1
www.dfi .com
Advertisement
Table of Contents
