Huawei HES-319M Installation Manual page 15

5. Align the flange holes with the threaded studs on the back of the ODU so that the side of the ODU with
the RJ-45 port faces down.
6. Slide the studs into the holes and spin M6 nuts on each bolt.
7. Tighten the nuts firmly but do not over-tighten.
8. Thread the screw provided with the grounding kit through one of the ring lugs on the ground wire and into
the threaded hole on the back of the ODU just below the ground symbol.
9. Tighten the screw.
HES-319M Installation 15