Remote Control Unit - Sanyo SAP-K161GJA Technical & Service Manual

ON/OFF operation button
1 HR. TIMER button
MODE selector button
FLAP button
TIMER ON button
ADDRESS switch
Transmitter
NIGHT SETBACK button
TEMP. setting buttons
ON/OFF operation button
8

Remote Control Unit

Display
The illustration above pictures the remote control unit after the cover has
NOTE
been lowered and removed.
When you press the buttons on the remote control unit, the
appears in the display to transmit the setting changes to the receiver in
the air conditioner.
Display Information on the operating conditions is displayed while the remote
control unit is switched on. If the unit is turned off, only the mode that
was set previously is still displayed.
For details, see ''Night Setback Mode''. When you press this button in
the DRY or COOL mode, the
remote control unit will automatically adjust the set temperature to save
energy.
Press the
Press the
This button is for turning the air conditioner on and off.
Transmitter
TEMP. setting buttons
NIGHT SETBACK button
FAN SPEED
selector button
TIMER SET button
(which advances the time
displayed)
TIMER OFF button
ACL button
Battery compartment
(Pull off the cover to expose
the batteries.)
mark appears in the display, and the
button to increase the set temperature.
button to reduce the set temperature.
(Cover closed)
mark
OI-379-08EG