Siemens VersiCharge Installation Manual
Dual post and cable management system for an electric vehicle charging station
Hide thumbs
Also See for VersiCharge:
- Installation manual ,
- Operating instructions manual (73 pages) ,
- Installation and operation manual (34 pages)
Related Manuals for Siemens VersiCharge
Summary of Contents for Siemens VersiCharge
- Page 1 INSTALLATION GUIDE VersiCharge Dual Post and Cable ™ Management System for an Electric Vehicle Charging Station...
-
Page 2: Table Of Contents
VersiCharge™ Dual Post and Cable Management System Index VersiCharge Single/Dual/Back-to-Back Mounting Warning Dual Post and Cable Management System for Siemens VersiCharge Concrete Pad, Power Feed and Anchor Requirements Single VersiCharge Mounting Dual VersiCharge Mounting Single/Dual Post and Cable System Installation... - Page 3 VersiCharge™ Dual Post and Cable Management System Figures Figure 1. Post base Figure 2. Single post Figure 3. Single Post - back view Figure 4. Single Post - left-side view Figure 5. Single Post - front view Figure 6. Single Post - right-side view Figure 7.
-
Page 4: Versicharge Single/Dual/Back-To-Back Mounting
Siemens sales office or Siemens Customer Service available at 1-800-SIEMENS. The contents of this Instruction Manual shall not become part of or modify any prior or existing agreement, commitment, or relationship. -
Page 5: Dual Post And Cable Management System For Siemens Versicharge
VersiCharge™ Dual Post and Cable Management System Dual Post and Cable Management System for Siemens VersiCharge VersiCharge units sold separately Features: • Single or dual mount pedestal • Siemens VersiCharge standard bolt pattern • 4” Aluminum pedestal post - .120” thick •... -
Page 6: Concrete Pad, Power Feed And Anchor Requirements
Siemens web link: usa.siemens.com/versicharge prior to wiring. Ensure breaker is off during all electrical work. All pedestals shall be factory pre-drilled for installing two (2) Siemens VersiCharge EVSE units. The post product is compatible with all VersiCharge models. -
Page 7: Single Versicharge Mounting
(hole at the top of the holster). Silicone sealer can be placed at each hole to provide a liquid-tight securement Install NM flex conduit to the bottom opening of the VersiCharge unit and terminate using provided ¾“ NM straight connector and reducer washers. -
Page 8: Dual Versicharge Mounting
VersiCharge™ Dual Post and Cable Management System Dual VersiCharge Mounting (Back-to-Back) using US2:VCPOSTGRY2 Figure 7. Dual mounting Figure 8. Dual mounting Figure 9. Dual mounting Figure 10. Dual mounting - back view - left-side view - front view - right-side view... -
Page 9: Single/Dual Post And Cable System Installation
VersiCharge™ Dual Post and Cable Management System Single/Dual Post and Cable System Installation using US2:VCPOSTGRY2 and US2:VCCMSSP Figure 11. Single/Dual Figure 12. Single/Dual Figure 13. Single/Dual Figure 14. Single/Dual mounting with Cable mounting with Cable mounting with Cable mounting with Cable... -
Page 10: Dual Cord Retractor Mounting
VersiCharge™ Dual Post and Cable Management System Dual Cord Retractor Mounting using US2:VCPOSTGRY2 and 2 US2:VCCMSSP parts Figure 15. Dual Cord Figure 16. Dual Cord Figure 17. Dual Cord Retractor Mounting Retractor Mounting Retractor Mounting - right or left view... -
Page 11: Power The Station(S)
VersiCharge™ Dual Post and Cable Management System Power the Station(s) Turn on the power feed to the station(s) and test as per the VersiCharge installation manual. - Page 12 This document contains a general description of available technical options only, and its effectiveness will be subject to specific variables Siemens Industry, Inc. including field conditions and project parameters. Siemens does not 3617 Parkway Ln. make representations, warranties, or assurances as to the accuracy or Peachtree Corners, GA 30092 completeness of the content contained herein.
Need help?
Do you have a question about the VersiCharge and is the answer not in the manual?
Questions and answers