Table of Contents
Advertisement
Chapter 4: Playing Discs
•
DVD Video discs – contain picture and sound (DVD-R, DVD-
RW, DVD+R, DVD+RW, and DVD ROM are compatible with
this player)
•
CDs (CD-R, CD-RW, CD ROM) – Audio CDs contain musical
or sound content only. MP3 discs are CDs that contain MP3
files. This player is also capable of playing CDs that contain
JPEG files, and Multisession CDs.
Like DVD video discs, VCDs contain
•
Video CD discs –
picture and sound content. The difference is the
amount of information that can be stored on the disc.
VCDs typically have lower picture and sound quality
than DVD discs.
Super Video CDs (S-VCDs) can be used to record up to
70 minutes of digital sound and video, with MPEG-2
standard video and MPEG-1 standard audio. S-VCD
disc compatibility is dependent on which MPEG
coding software, disc design software, disc writer
software are used, and the discs themselves.
This is an example of a
one-sided disc.
Note: Some discs may not be compatible due to laser
pickup and disc design.
32
Regional Coding
Both the Digital Media Recorder and the discs are coded by region. These regional
VIDEO CD
codes must match in order for the disc to play. This player's code is region 1.
Using Different Menus
Each disc is programmed with different features. There are three separate types of
menus that you can use to access features:
•
•
•
To Load and Play Discs
Turn on the TV and your Digital Media Recorder (press ON•OFF on the remote or
press the STANDBY/ON button on the Digital Media Recorder).
1. Make sure the TV is tuned to its Video Input channel (if you need more
This is an example of a
2. Press the OPEN/CLOSE button (the disc tray opens).
two-sided disc — the title
is usually in the center
3. Place a disc gently into the tray with the disc's label facing up (double-sided
of the disc.
4. Press the OPEN/CLOSE or PLAY button. The disc tray closes. The Digital Media
Note: If you don't see a picture, press STOP (the main menu appears), and check
the position of the PROG SCAN switch on the back of the unit. Make sure the
PROG SCAN switch is in the OFF position. Try playing the disc again.
The only time the PROG SCAN switch should be in the ON position is if you
connected this unit to a progressive scan TV via COMPONENT jacks.
When you stop playing a disc, the player remembers where you stopped. When
you start playing the disc again, the Digital Media Recorder picks up where you
left off unless the disc is removed or the player is unplugged, or you press the
STOP button twice.
The Disc menu – The Disc menu is part of each disc and is separate from the
Digital Media Recorder's menu. The contents of each Disc menu vary according
to how the disc was authored and what features are included.
To make the Disc menu appear, press the MENU button while the disc is playing.
The Digital Media Recorder's Info Display – The Info Display appears as icons
across the top of the screen when a disc is playing. It can only be accessed
while you are playing a disc. It's turned on and off with the INFO button on the
remote. The Info Display icons change based on the type of disc you're playing.
Go to page 34 for more information.
The Digital Media Recorder menu – If you're playing a disc, press STOP (the
Digital Media Recorder's menu appears automatically).
Remember: A feature will only work if the disc was programmed with that feature.
For example, if you choose subtitles on the Info Display, the subtitles will only
appear if the disc was created with subtitles. If a menu or icon is "grayed out" it
means that item (or feature) isn't available.
information, go to page 16).
discs have content on both sides, so you can place either side up).
Recorder reads the disc's table of contents, and then one of three things happens
depending on how the disc was programmed:
• The disc starts playing.
• The disc menu appears on the screen. One of the options will start disc play.
Highlight that option and press OK.
• The Digital Media Recorder's main menu appears on the screen. Highlight the
Disc menu and press PLAY.
Advertisement
Table of Contents
