Table of Contents
Advertisement
4 Installing USB Drivers
Levelogger Software Version 3.2.3 (or later) comes equipped with USB drivers.
4.1 USB Installation for Windows 2000
1)
Plug the USB cable into the Leveloader, then into the PC.
2)
Your PC will automatically detect the connected unit.
Figure 4-1 Found New Hardware Pop-up Window
3)
This will start the 'Found New Hardware Wizard', click next.
4)
In the 'Install Hardware Device Drivers' window, select 'search for a
suitable driver for my device (recommended)'.
5)
In the 'Locate Driver File' window, select 'Specify a location'.
Figure 4-2 Found New Hardware Wizard/Locate Driver Files
6)
In the next window point the browser to the USB driver folder located
in the Levelogger 3_2 folder.
Default Destination 'C:\Program Files\Solinst\Levelogger3_2\
USB Drivers
7)
Once the installation completes, a system restart may be required.
Leveloader Gold User Guide
Page 4
Advertisement
Table of Contents
Need help?
Do you have a question about the Leveloader Gold and is the answer not in the manual?
Questions and answers