Edit Altitude; Load Levelogger Settings Files - Solinst Leveloader Gold User Manual

Note:
Maximum altitude
value for the
Levelogger Gold is
5000 m (16400 ft).
The maximum altitude value
for the Mini LT Leveloggers is
3000 m (9750 ft).

8.4.4 Edit Altitude

'Edit Altitude' (Figure 8-8) is very similar in setup to the Edit Instrument Number
operation. The Leveloader Gold only allows the numerical value of the altitude
to be modified, not the units. Enter the altitude and select {SUBMIT} to confirm
the modification. The units of altitude can only be adjusted using Levelogger
Software on a PC.

8.5 Load Levelogger Settings Files

To use this feature, the 'Levelogger Settings Files' must be pre-programmed
using Levelogger 3.2.3 (or later) Software. Details provided in section 9.1.
Once selected, a list of up to 10 customizable settings are shown (Figure 8-9).
By using the Up/Down buttons, the user can select one of the settings and send
it directly to the attached Levelogger. A confirmation message will follow. Then
scroll down to restart the Levelogger.
Figure 8-9 Load Settings Files Menu
Leveloader Gold User Guide
Edit Altitude:
0
0123456789.-
{PREV} {NXT} {SUBMIT}
OK Cancel
Figure 8-8 Edit Altitude Menu
Load Settings Files
File 1 PumpTest
File 2 SlugTest
File 3 StepTest
File 4 Monitor1
File 5 Monitor2
OK Menu
22:27
22:28
Page 15