Settings; Smtp - Black Box CB-TOUCH7-T User Manual

B.3 IP Settings
This page is used for establishing the communication parameters for your ControlBridge Unit.
The ControlBridge Unit uses standard internet protocol (IP) communication parameters. Certain parameters can be reset by
the user. On start up, this page will display the ControlBridge Unit's given Physical address (MAC), Current IP address. Carefully
note this addressing information (and any changes you elect to make to the IP address, subnet mask, or default gateway). This
information must be entered into the ControlBridge Builder program written for your specific application. For control systems
with more than one ControlBridge Units, a unique IP address must be given to each ControlBridge Unit.
Some control systems are "standalone" and not part of a larger network. For such "stand alone" systems, the Host name is
optional. However, for control systems that are connected to a larger network, please obtain the Host name from the network
administrator, and enter it into the corresponding box. DHCP is not supported in this release.
Be sure to click the Apply button for any changes to become effective!

8.4 SMTP

Use this page to set SMTP server parameters. Set a name or an address and the port of your SMTP server.
Figure 8-3. Configuration screen.
Figure 8-4. SMTP tab.
877-877-2269 | blackbox.com
Chapter 8: Admin Control Panel
Page 23