Using Admin Control Panel - Black Box CB-TOUCH7-T User Manual

Chapter 5: Download the User Application

5.3 Using Admin Control Panel

Follow these steps:
1. Connect the touch panel to your computer as described in the PC Connection chapter.
2. Run ControlBridge Builder on your PC.
3. Open the appropriate project in ControlBridge Builder. The touch panel must be properly inserted and configured.
4. Use the Final tool bar button to open the Upload and Export Application dialog box.
Final Button
Export As Application Files ...
Figure 5-2. Admin Control Panel screen.
5. Be sure your touch panel is checked.
6. Use the Export All... button to export the application and store it in the file *.cvca.
7. Run the Internet browser on your PC and type in the same touch panel IP address that you see in the ControlBridge Builder
project, window Properties / IP address.
8. Go to the System page and check the current firmware version. If there is no actual firmware version in touch panel, upload
the firmware version that corresponds to the firmware version in the ControlBridge Builder project.
9. Go to the Applications page and upload the application file *.cvca.
10. To start the uploaded application, press the Start button.
877-877-2269 | blackbox.com
Page 16