Table of Contents
Advertisement
Chapter 8: Admin Control Panel
8. Admin Control Panel
8.1 Login
Run the Internet browser on your PC and type in the touch panel's IP address.
The factory default IP address is 192.168.1.128. The default password is empty.
This screen isn't displayed if the password is empty (factory default status).
If password isn't empty, you have to login first to use these web pages with your ControlBridge Unit.
Enter your password into the Password box and click the Login button to enter the ControlBridge Unit web pages.
Remember that the password is case-sensitive. To change the password, use the Password menu after you are logged in.
8.2 Configuration
Each ControlBridge Unit can be identified by a unique identification name. Unique names are most useful in applications
requiring more than one ControlBridge Unit. This enables programmers and installers to reference ControlBridge Units with
logical, user friendly names, like "boardroom," "lobby," etc.
To set the ControlBridge Unit identity, enter the unique name you wish to use in the Name box.
Be sure to click the Apply button for any changes to become effective!
Page 22
Figure 8-1. Login screen.
Figure 8-2. Identification tab.
877-877-2269 | blackbox.com
Advertisement
Table of Contents
