Chapter 5: Download the User Application
5. Download the User Application
5.1 Overview
A user control application is dedicated to control and it is programmed by ControlBridge Builder programming tools.
5.2 Using ControlBridge Builder
Follow these steps:
1. Connect the touch panel to your computer as described in the PC Connection chapterr.
2. Run ControlBridge Builder on your PC.
3. Open the appropriate project in ControlBridge Builder. Make sure that the touch panel is properly inserted and configured.
4. Use the Final button on the tool bar to open the Upload and Export Application dialog box.
Final Button
Upload Button
Figure 5-1. Upload and Export Application dialog box.
5. Be sure your touch panel is checked.
6. Use the Upload button to start the application upload.
7. If touch panel firmware isn't installed, it will be uploaded automatically first and then the application upload will finish.
877-877-2269 | blackbox.com
Page 15