Table of Contents
Advertisement
Chapter 7: On-Screen Display
7.6 Date/Time
Use this page to set the Date/Time parameters.
You can set the current date and time. Select appropriate field using the Edit button and then use the numeric keypad.
Select the time zone from the drop-down box.
The rest of the page is used for to synchronize the ControlBridge Unit's date and time with an internet clock. Select Yes to Use
Internet clock. Next, enter the IP addresses (or complete address name) of the primary and secondary NTP servers.
7.7 Applications
Use this screen to select, start, and stop uploaded applications. All uploaded applications are listed on this page.
Select the application and press the Start button. A "running flag" denotes the active application. The active application starts
automatically after you switch on the unit. You can stop the running application by pressing the Stop button.
Files are uploaded from a personal computer to the touch panel using ControlBridge Builder software or using Admin Control
Panel.
Page 20
19/04/2011
17:01:25
GMT+01:00 CET/CEST
Figure 7-5. Date/Time screen.
TestApp_TouchPanel1.cvca
DemoApp_TouchPanel1.cvca
Figure 7-6. Applications screen.
877-877-2269 | blackbox.com
Advertisement
Table of Contents
