Logik L32SWLB14 Quick Start Manual

Quick Start Guide
Soundbar with
Wireless Subwoofer
L32SWLB14
Thank you
for purchasing your new Logik Soundbar.
Please follow this quick start guide for a successful rst time set up.
We recommend that you spend some time reading the instruction manual in order to fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep the instruction manual for future reference.
1 1
Unpacking
Remove all items from the packaging. Retain the packaging.
If you dispose of it please do so according to any local regulations.
Main Unit
Subwoofer Remote Control
(battery included)
Mains Cable 3.5mm to RCA Stereo
(for Subwoofer) Audio Cable
3.5mm to 3.5mm Wall Bracket x 2
Audio Cable
Instruction Manual Quick Start Guide
Ins tru ctio n
Ma nua l
Quick Start Guide
2 2
Connections
Using the OPTICAL Connection
OPTICAL cable
(not included) Rear view of
the unit
TV
Using the AUX Connection
White
Red
3.5mm to RCA
Stereo Audio Cable
Rear view of
TV
the unit
Using the MP3 LINK Connection
3.5mm to 3.5mm
Audio device
audio cable
Side view of
the unit
3 3
Battery Replacement
The remote control requires a CR2025, 3V Lithium battery.
1. Slide and hold the battery
1
release tab in the direction
of the arrow.
2
2. Pull out the battery holder
and remove the old battery.
3. Replace with a new battery.
3
4. Insert the battery holder
back into the remote
4
control.
T T
You will nd that there are many exciting features available.
ip: ip:
To get to know all these features, please take some time to read the instruction manual provided.
Connecting to the Mains Supply
To the mains socket
Main Unit
To the mains socket
Subwoofer
Ensure all audio connections of the unit are
connected before connecting to the mains
power socket.
4 4
General Operation
Start Up
• Press /SOURCE on the main unit or on the remote control
to switch the main unit on. The status indicator of the last used
mode will light up.
• Press and hold /SOURCE on the main unit or press on the
remote control to switch the main unit back to Standby mode.
The POWER Indicator will light up red.
• Disconnect the mains plug from the mains socket if you want
to switch the unit off completely.
Selecting Modes
Press /SOURCE on the main unit or SOURCE on the remote
control repeatedly to switch between AUX, MP3 LINK,
OPTICAL and BLUETOOTH modes.
Adjusting the Volume
• Press VOL +/- to adjust the volume.
• If you wish to turn the sound off, press MUTE on the remote
control. Press MUTE again or press VOL + to resume normal
listening.
Automatic pairing
The subwoofer and soundbar will automatically pair when both
units are plugged into the mains sockets and turned on.
• When the subwoofer is pairing with the main unit,
the Pair Indicator will ash.
• When the subwoofer is paired with the main unit,
the Pair Indicator will light up.
QSG-L32SWLB14-140304V2