Initial Setup; Select A Language; Automatically Searching For Channels - RCA B27TF680 User Manual

Initial Setup

The first time you turn on your TV/VCR/DVD, you'll be asked to set a few screens so that your
TV/VCR/DVD will be set up correctly. Complete the following steps to set up your TV/VCR/DVD.
LANGUAGE
ENGLISH
ESPANOL
FRANCAIS
SELECT /
CONNECT ANTENNA
OR CABLE.
START AUTO CH PRESET?
YES
NO
PLEASE WAIT
AUTO PROGRAMMING
AIR 2
STOP
Chapter 1

Select a Language

The first time you turn on the TV, the SELECT LANGUAGE menu appears on the
screen. If you want the TV on-screen menus to appear in English, press the OK
button on the remote control. If you want the on-screen menus to appear in a
different language, follow these steps.
1. Press the down arrow on the remote to highlight ESPANOL (Spanish) or
FRANCAIS (French).
: SET OK
2. Press OK to select the language.
Note: If you need to change the language later, you can access this menu from the
main MENU (Chapter 5 has details).

Automatically Searching for Channels

The next part of the initial setup asks you if you want to start AUTO CH PRESET
(also called auto programming or auto channel search) – this enables the
TV/VCR/DVD to search for all of the channels that are viewable through your
cable TV connection or off-air antenna.
1. If you've connected your antenna or cable, press the OK button on the
remote (auto programming starts).
OK
MENU
When the search is complete the TV/VCR/DVD automatically tunes to the first
channel in the channel list.
Note: If the clock set screen appears, you can set the clock now or later (Chapter 5
has details).
OK
Connections & Setup
15